ELBILASER PENTADIODIC NT

(Code MELPCNT o MELPTNT)

AND ESADIODIC NT (Code MELECNT)

The ELBILASER PENTADIODIC NT and ESADIODIC of NT (new technology) series are made according to the most recent technology either in the LASER generation, then in the control devices. The special common characteristics of the equipments of this series are the following:

• they are completely microprocessor controlled for a very easy use and for the accuracy of the parameters.

• a big LCD DISPLAY (14,5 x 4 Cm.) highly readable shows all the user's parameters in the most common language (English, German, Spanish, French); you can set all the parameters in an easy and clear way: on the display you can read the function of any key and the values relative to your setting.

• the laser emitters are supplied at low-voltage and therefore the operator and the patient are absolutely safe.

• the LASER I.R. emitters are made according the MOCVD Quantum Well technology, and ensure so a high power despite the working temperature; the emission power remains constant during all the treatment time and the life of the source is extended.

• the LASER emitters are focused so that you can obtain the maximum energy density only when they are in contact with the treatment part: therefore both the operator and the patient are absolutely safe.

• the 5 diodes handpiece has also 4 red aiming emitters that show clearly the treatment area with their red radiation.

MODELS

LASER PENTADIODIC: it has a 5 laser diodes handpiece with 4 red aiming emitters also. Three versions are available:

• MELPTNT: LASER PENTADIODIC tabletop version - Weight: Kg. 7 - Dimensions: cm. 43x35x14

• MELPCNT: LASER PENTADIODIC with trolley and arm - Weight: Kg. 19 - Dimensions: cm. 48x37x92

LASER ESADIODIC: same characteristics as the pentadiodic, provided with a further handpiece with one diode to treat the trigger points. The monodiodic handpiece can be activated simultaneously or separately.

• MELECNT: LASER ESADIODIC with trolley and arm - Weight: Kg. 19 - Dimensions: cm. 48x37x92

CONTROL ELEMENTS

• LCD DISPLAY

• 5 multifunction keys

TECHNICAL CHARACTERISTICS

• Power supply: 220/240 V - 50/60 Hz - 110 V - 50/60 Hz on request

LASER CHARACTERISTICS

• Type of source: GaAs (Gallium Arsenide) diode

• Peak power: up to 35 Watts per diode

• Wavelength: 904 nM

• Frequency: from 310 to 6400 pulses/s

• Pulses length: 120 nS

• Diods quantity LASER PENTADIODIC: 5 - Total 175W - LASER ESADIODIC: 5+1- Total 205 W

• Aiming diods: n. 4 (four) 650 nM (red) emitters - total power 20 mW