ELBILASER MONODIODIC HP1 and MP1

HIGH POWER INFRARED LASER

(Code MELASMO - MELASMP)

The LASER emission is a very particular electromagnetic energy with special physical characteristics, generated by high-tech active components.

The main biological effects of stimulation by means of infrared pulsed LASER radiations are the following:

• quickening of metabolic cellular processes

• increase of the local blood flow

• antioedema action

• local analgesic action

• local bactericide action

• stimulation of immunity systems

The ELBILASER MONODIODIC is made according to the most recent technology either in the LASER generation, then in the control devices. The special common characteristics of this instrument are the following:

• they are completely microprocessor controlled for a very easy use and for the accuracy of the parameters.

• the laser emitters are supplied at low-voltage for a greater safety for both the operator and the patient.

• the LASER I.R. emitters are manufactured according the MOCVD Quantum Well technology, and ensure so a high power despite the working temperature; moreover the life of the source is extended.

• the LASER emitters are focused so that you can obtain the maximum energy density only when they are in contact with the treatment part: it means a greater safety for both the operator and the patient.

• The invisible infrared emission is combined with a strong visible red emission (around 650 nm).

ELBILASER MONODIODIC is available in two models with the same characteristics and different peak power: Mod. HP1: 35 W peak power - Mod. MP1 25 W peak power.

TECHNICAL CHARACTERISTICS

• Supply: 220/240V 50 Hz - 30W (110V-60 Hz on request)

• Size and Weight: 25.5x25x10 cm - 2 kg

LASER CHARACTERISTICS

• Number of diodes: 1 GaAs (Gallium Arsenide) diode

• Peak power Mod. HP1: up to 35 Watt (Code BELASMO)

• Peak power Mod. MP1: up to 25 Watt (Code BELASMP)

• Wavelength: 904 nm

• Frequency: from 500 to 5000 pulses/s

• Pulses length: 120 ns

• Aiming sources: 3 red semiconductor sources - 650 nm

CONTROL ELEMENTS

• Timer with STANDBY function (real time of application)

• Laser emission TEST with optical/acoustical feedback

• START/STOP control on the handpiece